LiteSava - Patented power and light energy saver - up to 15% SAVINGS
To the best of our knowledge, this is the ONLY power saving product in its class that actually works. This has been confirmed by two independent laboratories who have tested the LiteSava. You can obtain a copy of these reports at the 'Customer Support, Download' page.
LiteSava provides Voltage Power Optimisation resulting in real-time accumulated energy savings across business and industry.This unique patented device achieves electricity cost savings of up to 15% ¹ by identifying the optimum voltage needed to efficiently run any fluorescent, incandescent, tunsten and halogen lighting. Simultaneously prolongs equipment and component lifecycle by up to 25% ² thus resulting in reduced carbon footprint.
Fully compliance-tested, the LiteSava will maximise energy savings without reducing the performance of the lighting, and is suitable for use in the industrial, retail, commercial, health and education sectors.
Background:
The average voltage supply from the UK’s National Grid is 242 Volts but actual supply can vary from a minimum of 216V to a maximum of 253V³. This large variance in supply voltage causes costly problems. The majority of lighting systems operate at maximum efficiency at 230 Volts therefore an increase in voltage supply of as little as 4.3% to 240 Volts creates; higher power usage (up to 13% more power), shortens lighting systems life cycle and increases CO2 emissions.
Benefits:
The LiteSava combines a number of advanced technologies with a unique ‘intelligent’ chip and program to identify the ‘optimum’ voltage and power needed to run lighting, resulting in:
1. Cheaper electricity by eliminating the wasted power.
2. Increased equipment life cycle by reducing the ‘overworked’ lighting and fan systems caused by
higher voltage.
3. A reduction in CO2 emissions and therefore in overall carbon footprint.
The LiteSava has been fully certified by two independent accredited testing companies¹, both reporting that, dependent upon incoming Voltage, the LiteSava can achieve savings of up to 15% ¹. Thus the greater the incoming mains Voltage and the larger the power (Watts) needed to run the lighting and fan systems, the more money is saved.
¹ Independent testing by LCS 21/8/2008 & Emtek 19/10/2008.
² Refer to lighting federation report 2001 on 240V supply & reduction of ballast lights.
³ Refer to Harmonization Agreement 1998.
|
Operation
Each LiteSava unit can regulate up to 2,500 Watts (2.5 KW) - when connected to the RCB(s) that serve the light and 3.0 KW for other lighting types such as incandescent, halogen and tungsten. When the Mains Switch is turned on, the LiteSava starts working. The integrated Power Meter allows the measurement of Watt usage both before and after the LiteSava is triggered. The unit can also record the incoming Voltage; total KW used; and the duration of usage.
System Compatibility
The LiteSava will work with mains fluorescent lights (traditional and electronic ballast), tungsten, halogen, filament lights without reducing performance.
Safety Assessment
The LiteSava is fully CE, UL, CCC, SAA certified and RoHS compliant and has been independently tested to measure its performance. The unit also has the following added safety features:
1. Automatic Overload Protection System – an automatic shutdown of electrical power is performed if the load exceeds the LiteSava rating of over 2.5 KW or if a light system fault occurs. 2. Micro Cooling System - ensures a greater operating life for the unit and makes it safer to use with larger powered lighting units.
Conclusion
The Lighting Federation Report 2001 stated that the only way to successfully reduce costs and increase appliance life cycle is through a system of “Voltage Control” - The LiteSava does this effectively and efficiently at a fraction of the cost of other systems.
The LiteSava unit operates 24/7, comes with a 2 year guarantee, is fully CE certified and RoHS compliant, and could deliver significant returns on investment.
¹ Independent testing by LCS 21/8/2008 & Emtek 19/10/2008
|
 |
|
|
|
ALPHA EMPTOR LIMITED Copyright Alpha Emptor Limited-No reproduction or copying permitted-AE is a Registered Trademark AE Asia Sales office
Phone: +86 755 2664 7764
fax : +86 755 2664 8864
email: sales@aemptor.com
AE European Sales office
Phone: +44 (0) 20 8815 9308
fax : +44 (0) 20 8444 6901
email: uksales@aemptor.com
Chinese
English
Litesava Brochure
Chinese, Simplified
English
French
German
Italian
Spanish